Home :: :: Strapping Machine

Strapping Machine

  • Adhesive effect is not good.

    2010-4-14

    The temperature is too high or too low. The position is usually on scale 4-5.Improper adjustment of electric steel. Steel slice is too high or too low or to left or to right, so if touch the PP strap or the knife, there will be trouble such as heating failure. You should adjust the position of the s...

  • PP strap feeds failure.

    2010-4-14

    1. The potentiometer for controlling strap length is at zero position. Adjust the position. 2. The strap is not put at the right position. Refer to the strap drawing. 3. There is foreign body in upper or lower parts of the machine. Clean and check the machine. 4. The space between the rollers for s...